Hot fan is the product of upgrading of modern industrial heat source. It is the hot air source configuration of hot air conveying furnace, drying furnace, oven, sealing machine and other automatic machinery. So how does a hot fan work?
The hot fan is composed of blower, heater and control circuit. It realizes the control of operating temperature and air volume. In addition, the hot fan is also set up an overtemperature protection circuit for the air inlet of the fan and the motor, and the total circuit is set up a serious switch, further improving the protection of the equipment. How does a hot fan work? Follow Xiaobian to learn about it.
After the hot fan is energized, the blower blows the air to the heater, so that the air passes evenly from the inside and outside of the spiral electric heating wire. After the electric heating wire is energized, the heat generated by the electric heating wire is exchanged with the cold air passing through, so that the wind temperature of the outlet is raised. The K-type thermocouple at the outlet will timely feedback the detected outlet temperature to the temperature control instrument, which monitors the actual working temperature according to the set temperature, and transmits the relevant information back to the solid state relay to control whether the heater works or not. At the same time, the ventilator can use the air volume regulator (frequency converter, air door) to adjust the air volume of the blown air.
The heating body of the heating fan is mainly made of high quality nichchromium heating body combined with high quality PTC composite ceramics, and then connected in the multi-layer aluminum radiator, the heat energy is blown out through the fan. Air mobility is better than other overall heating type heaters, so it can make a certain space range of rapid warming, but because of its rapid heat production and rapid heat dissipation, so its energy utilization rate is not as high as other overall heating type heaters. More suitable for small space, short time use.
