Oct 23, 2018 Leave a message

What are the series of stainless steel gear pumps?

What are the series of stainless steel gear pumps?

Stainless steel gear pumps are available with externally meshed stainless steel gear pumps and internally meshed stainless steel gear pumps.

The external mesh stainless steel gear pump models are available in 2CY series, KCB series and YCB series. This series of stainless steel gear pumps are mainly composed of gears, shafts, pump bodies, safety valves and shaft end seals. The gears are nitrided for high hardness and strength and are mounted with the shaft in a replaceable bushing. Lubrication of all parts in the pump is automatically achieved using the output medium while the pump is operating.

The pump has a well-designed oil drain and oil return groove, which is the smallest torque force that the gear can withstand during operation. Therefore, the bearing load is small, the wear is small, and the pump efficiency is high. The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, note that this safety valve cannot be used for long-term work of the pressure reducing valve. It can be installed separately on the pipeline when needed. The pump material is: 304.316.316L stainless steel, which meets the requirements of different corrosive media and industrial and mining.

The internal gear stainless steel gear pump has NYP series and NCB series, which are mainly composed of inner and outer rotors, shafts, pump body, front cover, bracket, seal and bearing. The seal has two forms: mechanical seal and packing seal. For high temperature, high viscosity and corrosive medium, packing seal is used. When transporting easy-to-crystal materials, the insulation cover is designed on the front cover and the pump body, and is melted by steam insulation during operation. The inner and outer rotors of this series of pumps have the same steering, low wear and long service life. Particularly suitable for the transport of highly viscous media. Application industry: It is suitable for conveying pure and certain viscosity fluids, which can be used to transport oils such as lubricating oil, crude oil, etc. It can also be used to transport rubber, asphalt, paints, adhesives, dyes, paints, lubricants, polyols. High-viscosity materials that do not contain particulate impurities, such as foods and pharmaceuticals; they can also be used to transport high-temperature, high-viscosity polymer melt materials such as PA PB PC PE PS HIPS ABS PP PET PVA.

pump motor

Send Inquiry

whatsapp

teams

E-mail

Inquiry