What are the series of hardened gear reducers?
Hardened surface reducer is divided into four series, R series helical gear hard surface reducer, F series parallel shaft helical gear hard surface reducer, K series helical gear - spiral bevel gear hard surface reducer, S series oblique Tooth-worm gear hardened reducer. Therefore, the hardened gear reducer has another name called the four series of reducers. Since there is a German brand in the hardened gear reducer, the best and the best is SEW, so many customers only know that the hardened gear reducer is called SEW reducer, but they don’t know the trueness of the hardened reducer. name.
In the four series, each series has its own characteristics. For example, the R series and the F series are parallel axis outputs. The K series and the S series are right angle output, but the structure inside the reduction box has the essence. The difference is that the customer has to choose the corresponding series according to the characteristics of their own equipment. Moreover, there are several installation methods in each series. For example, the R series has a horizontal installation of the foot, a vertical installation of the flange, etc., and this needs to further determine the installation method according to actual needs. Therefore, the selection step of the hardened gear reducer should first determine which series is selected, and then determine which installation method, and finally the power, speed ratio, torque and so on.
If the customer does not know which series of hard-tooth reducer is, or does not know which series should be used, it does not matter, as long as the physical picture is provided, or the detailed parameter requirements of the equipment are provided, we will reduce the hard surface reduction opportunity of the company. Specialized selection personnel are dispatched to provide one-on-one special service, so that you can choose the most suitable and best hard-tooth surface reducer.
