Three current technical status and countermeasures
At present, our factory already has generator technology, and the converter system is under development. It has been completed in early 2010. Other technologies are still in the blank. In order to quickly enter the market, we should adopt a two-legged approach, namely independent research and development and technology. Introduced. At present, domestic manufacturers with this technology have Nanjing Keyuan Automation Group Co., Ltd. and other manufacturers. Beijing Jingxin also owns this technology and trial operation on 1MW units.
In terms of independent research and development, in view of the complexity of the wind power control system, it is necessary to cooperate with a strong university. It is necessary to set up multiple sub-projects in research and development, because the project includes computer hardware, power electronics, software, communication and other technologies. It is also scattered throughout the wind turbine.
Four conclusions
The main direction of wind power generation:
1 Land wind turbines use 1.5/2M doubly-fed asynchronous generator sets.
2. The offshore wind turbine adopts 4/5M permanent magnet synchronous full-feed generator set.
3. Construction of large or super large wind farms (with hundreds of wind turbines).
4. The wind turbine control system has anti-voltage penetration function.
5. The wind turbine can adjust the power factor during online power generation. It can also adjust the power factor when no power is generated, and perform reactive power compensation to clean the power grid.





