Three inspections are essential, daily maintenance of excavator generators
5. Check the scale and dust of the generator's exterior and remove it in time.
The generator generates a lot of heat during the work, which makes the temperature of the generator too high. If the temperature is too high, the generator may be burned out, so the generator is usually equipped with a fan for forced heat dissipation. If there is too much dirt or dust on the generator, it will affect the heat dissipation effect, which will increase the probability of generator burnout, so it is necessary to remove the scale and dust on the generator casing in time.
6. Check the fastening conditions of the fasteners related to the generator.
If the fasteners are loose or fall off, it is possible to cause the engine to vibrate severely, causing an accident in the machine. In addition, if the fastener is loose or detached, it may cause voltage and current instability, and even damage to electronic components such as meters. Therefore, it is also important to check the condition of the fasteners associated with the generator in time.
7. Check the tightness of the drive belt.
If the belt of the generator is too loose, the belt will slip, which will also cause the generator to not rotate or the speed is too low. This will cause the generator's voltage and current to be unstable or not to generate electricity. If the conveyor belt is too tight, the bearing on the charging generator, fan and water pump will be aggravated, and the generator will be scrapped.
Summary: The generator on the excavator is very important, especially in today's highly developed and rapidly developed electronics, the importance of the generator as a foundation is becoming more and more important. Therefore, the daily maintenance of the generator is even more important. In the daily maintenance of the excavator, we must not forget to check the generator to avoid unnecessary losses.
