Jan 24, 2019 Leave a message

the concept of the hub motor

Abstract: With the introduction of relevant policy standards for energy conservation and emission reduction, traditional power vehicles have gradually transitioned to new energy vehicles. The latter is significantly simpler in mechanical and electrical construction than the former. Replace the traditional engine by integrating the motor with the battery. However, there is one of the biggest problems that plagues electric vehicle developers. In addition to the simplified transmission structure, the transmission system is still very complicated. At present, if the hub motor technology can be fully promoted, it will be able to replace the existing transmission system of the car.

Second, the concept of the hub motor

The origins of hub-and-wheel motor technology can be traced back to the first century of the 20th century, when Ferdinand Porsche developed an electric vehicle with a front-wheel hub motor when it had not yet established PORSCHE. In the 1970s, the use of wheel hub motor technology made a good response on mine transport vehicles. In addition, Japanese car companies have been conducting research on the technology of passenger wheel hub motors relatively early, and basically occupy a leading position. International auto giants such as Toyota and GM are also involved in the technology. At the same time, domestic brands that have developed wheel hub motor technology have gradually emerged.

Figure 2 historical hub motor car

The hub motor, in a common sense, combines the metal hub and the drive unit directly into an integral drive motor. In other words, the drive motor and the drive brake are integrated into the hub, commonly known as the "electric wheel", also known as the wheel. Motor (wheelmotor). It contains bearings, stators and rotors, small inverters, etc.

1

Send Inquiry

whatsapp

teams

E-mail

Inquiry