Electronic lock is a kind of electronic products which can control the circuit or chip work (access control system) through password input, so as to control the closure of mechanical switch and complete the task of unlocking and closing. Now widely used electronic door lock is chip as the core, through programming to achieve. The main components are: MCU, clock, keyboard, LCD display, memory, demodulator, line multiplexing and monitoring, A/D conversion, buzzer and other units.
There are many kinds of electronic locks, there are simple circuit products, there are also chip based cost-effective products. Now widely used electronic password lock is chip as the core, through programming to achieve. Electronic lock in the field of security technology, with anti-theft alarm function of electronic lock instead of the traditional mechanical lock, to overcome the mechanical lock password amount is small, poor security performance shortcomings, so that the combination lock whether in technology or in performance are greatly improved one step.
Principle of electronic lock
Now many electronic locks are based on 51 series single chip microcomputer (AT89051) as the center, with the corresponding hardware circuit, the completion of the code setting, storage, identification and display, drive the electromagnetic actuator and detect the driving current value, receive the alarm signal sent by the sensor, send data and other functions.
The microcontroller accepts the typed code and compares it with the code stored in EEPROM. If the code is correct, it drives the electromagnetic actuator to open the lock. If the code is incorrect, allow the operator to input the code from the beginning, up to three times; If three times are not correct, the microcontroller through the communication line to the intelligent monitor alarm. The single chip microcomputer will each unlock operation and the current value of the electromagnetic actuator at the moment as the status information is sent to the intelligent monitor, together with the alarm information received from the sensor interface is also sent to the intelligent monitor, as the basis for intelligent analysis.
Wireless electronic lock. Non-lock electronic lock, can be mainly used in logistics transport, storage, milk transport truck, armored truck, refrigerated truck, medicine transport, tobacco transport and other transport categories. For example, it is used on the doors of armored vehicles, manhole covers of special vehicles and warehouse doors to ensure the safety of the goods being transported or guarded to avoid theft. The electronic lock uses the mechanical lock body to connect with the relevant skills of the Internet of things. The wireless transceiver module is installed in the lock body. When the lock body is opened and closed, the wireless transceiver module will transmit the open and close signals to the monitoring host over long distance. Such as the monitoring host to accept the lock signal appears in abnormal time, the signal will be identified as theft and pry signal, monitoring host immediately alarm information, so that the relevant personnel timely disposal, to avoid the loss of finance.
Composition and application of electronic lock
The core components of electronic lock: motherboard, clutch, fingerprint collector, password technology, microprocessor (CPU), intelligent emergency key. As a fingerprint lock, the most important thing should be the algorithm chip, that is, the heart is good, and your mechanical part is good. If the degree of recognition is high, anyone's fingerprint can be opened, then what is the use?
Secondly, no matter what kind of lock, its essence or mechanical products. Fingerprint lock belongs to the use of modern high-tech transformation of the traditional industry model, its core technology is first or mechanical technology grasp.






