1. The universal motor in the machine is damp and the coil is short circuit.
Soybean milk machine motor does not turn
Solution: replace the universal motor.
2. The relay cannot engage or break its feet.
Solution: replace the relay.
3. Continuous use time is long, resulting in high temperature temperature of the universal motor.
Solution: Turn off the switch, suspend the use, and slowly cool the motor.
4. Improper use leads to water intake in the machine and local short circuit of the computer board.
Solution: use a hair dryer to blow out the computer board and the machine water.
5, Jiuyang soybean milk machine can only heat the motor does not turn what is the reason for help?
The relay or the motor is usually damaged.
Two, soybean milk machine machine after repair but the motor does not turn is how to return a responsibility?
Many people in repairing the soymilk machine always say that after the machine is repaired, With the cleaning function test machine key motor can rotate, And add clear water with full bean function test machine, When the water opens, beat no beans, In fact, when we repair most soybean milk machine, we can not directly add clear water test machine, Because the clear water does not produce foam after boiling, While most machines have two sensors, One is the water level detection, That is, the long induction needle, One is the overflow-proof detection electrode, That is, the short induction needle, So when we repair the machine, we just add soapy water to the machine and follow the procedure, Talk about the working process of soybean milk machine again, The water injection level induction needle in the bucket detects the water level to signal to the motherboard to drive the heating rod to heat the water, As the water boils, more and more foam will rise as the water boils in the bucket. When the foam rises to contact with the overflow electrode, the overflow electrode immediately gives the signal to the motherboard that the water has been boiled, and at the same time, the main board will immediately stop the heating rod heating, and the output signal drive motor began to beat beans in the whole process of making soybean milk, the above process will be repeated several times until the machine alarm.
