Solve common defects in the use of fan motor
If the motor has some defects in use, it will have a great impact on the use of the fan. Ensuring the normal use of the fan motor is the most basic requirement for ensuring ventilation and ventilation. Although the maintenance of the fan can not completely eliminate the fan failure, it can also help a lot. In the operation and use of the fan, the remaining amount of the motor is relatively large, which is a common problem, and the fan is often operated under high-speed, low-load operating conditions, the fan vibration is large, the site noise is extremely strong, and the working environment Very bad. When the baffle is adjusted to less than 10%, the pipeline will surge due to excessive negative pressure, which will endanger the safety of equipment operation. Personal safety and equipment safety are the most important in any environment.
The inertia torque output of the fan is large. Under the condition of the grid capacity in the factory, the starting current of the motor is very high when the motor is directly started, which may cause the high-voltage power supply line to be protected, and the motor cannot be continuously started. This requires the user to pay sufficient attention to the current and rated voltage of the power supply when starting the motor, so that the motor can start under normal conditions.
The power loss of the fan is severe, and the power consumption per start of the motor is about one day of power consumption during normal operation. In normal operation, when the opening degree of the baffle is particularly below 50%, the wind pressure on both sides of the baffle is large, and great throttling loss and wind pressure loss occur. This is really complicated to solve, and the user needs to master some special power knowledge.
Although these problems do not occur in every user's fan, many problems are often caused by the neglect of the user in use. Therefore, regardless of whether the user's fan has the above problems, it is necessary to use the fan motor in use. Maintenance, this also ensures the ventilation and ventilation effect.






