Power Engineering Installation () is a professional and dangerous construction project. The process is cumbersome and involves all aspects, so there are many things to be aware of during the power installation process. As a senior electric power installation company in Dongguan, Xiao Bian specially summarized the following precautions:
1. The on-site construction personnel should have the corresponding technology and experience, and successfully obtain the corresponding certificates, such as electrician certificate, special operation personnel operation certificate, high-voltage electrician certificate and other certificates.
2. During the operation of the electrician, guardian personnel must be set up to take charge of the personal safety of the construction personnel.
3. When working on a line that may be energized, first disconnect the power supply of the equipment and take precautionary measures against the lines that may be powered.
4. When repairing the electrical circuit, the power should be cut off first, and the lock should be locked. At the same time, the signboard “Someone is working, no closing” should be hanged, and special personnel should be taken care of.
5, insulation inspection tools, should be properly kept, placed in a dry, clean tool cabinet, regular inspection, verification, before use, confirm that the tool is normal before use.
6. Working near live equipment, it is strictly forbidden to use steel ruler/tape measurement.
7. When using a dry electric box or transformer, the outer casing should be grounded.
8. When wiring, you must use a suitable wire stripper to not damage the core.
9. The rated current of the fuse used in electrical equipment should match the load, and the fuse size cannot be replaced at will.
10. Before the installation of electric power, it should be fully prepared. The person in charge of the work shall explain the safety measures and precautions to all personnel and clearly define the division of labor.
11. The staff must wear the appropriate protective tools as required before construction.
As a professional and extremely strong work, the power installation project requires strict technical and quality construction personnel to ensure safe construction and quality of power installation engineering.
