Nozzle motor wire slipping
Causes of slippage 1. The small screws on the middle feed roller of the nozzle are not fixed tightly, causing the displacement between the motor and the motor to cause slippage. 2. The distance between the wheel on the left side of the nozzle and the wire feed wheel is too large, and the pressure is not tight enough to cause slippage.
Slip cause
1. The small screws on the middle wire feed roller of the nozzle are not fixed tightly, which causes the displacement between the motor and the motor to cause slippage.
2. The distance between the wheel on the left side of the nozzle and the wire feed wheel is too large, and the pressure is not tight enough to cause slippage.
Required tools
3 hex wrenches and diagonal pliers included
Approach
1, first remove the nozzle
2. Disassemble the sliding nozzle and remove the cover
3. Remove the screw with a medium-sized wrench and open the cover.
4. Tighten the shaft with the smallest wrench
5, put it back
