Sep 06, 2022 Leave a message

Motor, the king !

When it comes to volume, it turns xx circles per minute, who can have it "roll"? !

to say volume,

"Contract" industrial energy consumption 30%,

Under the pressure of double carbon, who can have the pressure that it must be rolled? !

To talk about volume, industry, automobile, aerospace, medical treatment... It is everywhere in life, and it plays a decisive role. Can we not volume?

 1

As an important driving force for the development of modern human civilization, motors are almost ubiquitous in today's society, providing a source of power for a large number of basic applications in modern life. As a technology leader in the field of embedded motors and motion control machines, ADI Trinamic provides a complete range of intelligent motor motion control solutions, including board-level integrated circuits (ICs) or microchips, and system-on-modules (SoMs) integrated at the system level. ), as well as motion controllers, drivers, stepper motors and BLDC motors and their various combinations, can be called the uncompromising "king of the roll king" in the pursuit of motor motion control and performance power consumption.

For example, if you want a stepper motor to run smoothly, designing a set of good motion control trajectory curves is equivalent to half of the perfect motion control. The motion trajectory curve of the motor includes a trapezoidal curve and an S-shaped curve. Compared with the trapezoidal curve, the S-shaped curve is more stable, overcomes the unfavorable factors of sudden acceleration of the former, and can reduce the impact more effectively. ADI Trinamic implements traditional software algorithms through hardware, thus saving the burden of the CPU, making the original complex S-curve easy to implement, and reducing the workload of production and research and development.

 image

The figure above demonstrates the use of an ADI Trinamic "S" ramped acceleration profile to rapidly move a glass full of beer between two points (figure a.), compared to normal motor motion control (figure b.), without Spill a drop of beer, and the same principle applies to pipetting robots used in medical research or other liquid handling applications.

Stealthchop and Coolstep owned by ADI Trinamic, by continuously adjusting the acceleration and deceleration rates of the manipulator, avoid the protruding points in the speed curve to reduce the jitter of the system, and the "S"-shaped slope enables it to reach higher speeds, And still get to its next position precisely with minimal disturbance to its payload, making stepper motors run more smoothly and more energy-efficiently, these algorithms can also help industrial material haulers move heavy loads quickly and efficiently. In the case of no feedback device, the stepping motor can still achieve speed control and positioning control, and has the advantages of good rigidity and high cost performance. It is widely used in production line transmission, engraving, textile, security, medical and other fields.

In addition, in high-speed applications, servo motors such as BLDC (Brushless DC Motor) and PMSM (Permanent Magnet Synchronous Motor) are more advantageous. FOC (Field Oriented Control) is currently the most efficient control method in servo control. ADI Trinamic's hardware-based space magnetic field vector control can precisely control the magnitude and direction of the magnetic field, resulting in stable motor torque, low noise, and rapid response, improving motor efficiency and accuracy. In terms of noise reduction in the operation of stepper motors, ADI Trinamic also has three major tricks as the "roll king":

image

· Through micro-stepping, the accuracy, torque and efficiency of the motor are improved, while out-of-step, vibration and noise are reduced;

· Advanced current-controlled PWM chopper modes such as SpreadCycle, which automatically configure a hysteresis decay function between slow and fast attenuators, the average current reflects the configured normal current, and there is no transition period at the zero-crossing point of the sine, which In terms of reducing the fluctuation of current and torque, the current waveform is closer to a sine wave. Compared with the traditional constant chopper mode, the motor under the control of the SpreadCycle PWM chopper mode runs more smoothly and smoothly, thus realizing silent motor control.

· Regulated Chopper StealthChop overcomes this problem by modulating the current according to the PWM duty cycle, resulting in a perfect current sine wave. In addition to the unavoidable sound of motor bearing steel ball friction, StealthChop can drive the motor to work in an extremely quiet state, and realize the control of the motor sound below 10dB, and the noise is much lower than the traditional current control method.

In the future, motor applications will continue to move towards a broader market space with the impetus of innovation and the rise of emerging industries such as new energy vehicles, 5G, and digital healthcare. On this increasingly "rolling" track, ADI Trinamic has created a broad portfolio of products and solutions focused on transforming digital information into precise and efficient physical motion, bringing new possibilities for smart manufacturing and industrial automation applications. precision, flexibility and productivity levels.

Send Inquiry

whatsapp

teams

E-mail

Inquiry