Micro Gear Motor suppliers briefs on the use of DC geared motors
As the name suggests, DC motor is a kind of motor that can provide different speeds and torques. It is suitable for smart home, medical equipment, automobile drive, electronic products, etc., such as air dryers, home audio and video equipment, electric toothbrushes, and intelligent mice. Etc. is applied to the DC geared motor, then in the next Longhui Xiaobian will elaborate on the use of DC geared motor.
1. When starting the buck, it is necessary to grasp the starting moment, not too fast or too slow, and ensure that the starting current cannot be exceeded.
2. Lubricate the motor bearings only with grease as required by the standard. Do not mix two or two greases.
3. After replacing the carbon brush, the neutral point of the brush must be reset, light load for 5 minutes, and heavy load operation.
4. In the case of abnormal operation or noise when the DC motor is running, if there is an immediate shutdown, find the cause.
5. Some motors of DC motor are not normal.
6. When the commutator dust is wiped with ethanol, it must wait for the ethanol to evaporate before starting.






