Shredder, one of the most common office appliances, is used to destroy waste paper in order to protect important and confidential documents. Generally speaking, the service life of the shredder is 7-10 years, and timely maintenance and regular maintenance can prolong the service life of the shredder. Here are some shredder maintenance tips:
1. Oil the cutting device regularly to reduce wear, remove dust accumulated in the blade, and replace the broken carton filled in time.
2. Try to avoid continuous use time more than 10-15min to avoid overheating machine failure.
3. Do not put the wet paper into the shredder, so as not to rust the tool and affect the service life.
4. The amount of broken paper should be lower than the maximum amount of broken paper stipulated by the machine.
5. Cd-rom, disk, credit card, cloth, plastic, hard metal and other items, if not clearly stated can be broken, do not put into the shredder.
6. Before cleaning the machine shell, please cut off the power supply and wipe gently with a soft cloth stained with detergent or soft soapy water. Do not let the solution enter the machine; Do not use bleach, gasoline or dilute scrubbing.
In addition, when using the shredder, we will inevitably encounter some failures. The following are the troubleshooting and solutions of some shredders:
1. The shredder cannot feed paper: check whether the sensor, circuit board and motor are working normally.
2. Paper jam in the shredder: if the shredder has a backsliding function, you can press the backsliding button to see if the paper can exit by itself; If there is no back-up function, you can try to power off the shredder directly, then turn the shredder upside down, remove some of the shredder with a screwdriver, and then power on to start the shredder.
3. The shredder is not powered on: check whether the power supply is properly connected; Check whether the switch is turned on; Check whether the fuse is broken down; Check whether the circuit board is broken down; Check that the garbage can is properly placed.
4. Abnormal noise of shredder: check whether the cutter is damaged; Check whether the shredder is too much, affect the normal work of the tool; If it is an older model with a belt, be careful to check if the belt is loose.
