Multi-functional electric medical bed is mainly used for the hospital intensive care unit (ICU) and general ward patients for treatment, rescue and transfer. The multi-functional electric medical bed is composed of ABS bedside, ABS lifting guardrail, bed plate, upper bed frame, upper bed frame, lower bed frame, lifting connecting rod, electric linear transmission, controller, universal wheel and other main components. The multi-functional electric medical bed is composed of ABS bedside, ABS lifting guardrail, bed board, upper bed frame, lower bed frame, lifting connecting rod, electric linear transmission, controller, hand control board, universal wheel and other main components. Driven by an electric putter.
matters need attention
1. Before using the multi-functional electric medical bed, first check whether the power cord is connected firmly. Is the controller cable reliable.
2. The linear transmission wire and power cord of the controller shall not be placed between the lifting link rod and the upper and lower bed frames, so as to avoid cutting the wire off and causing personal equipment accidents.
3. After the backplane is raised, the patient lies upside down on the panel and is not allowed to push it out.
4. People can not stand on the bed surface and jump. When the back plate is raised, people can sit on the back plate and stand on the bed surface panel, and they are not allowed to implement it.
5. After universal wheel braking, no push and move, only after releasing the brake.
6. Horizontal implementation is not allowed to avoid damage to the lifting guardrail.
7. The uneven road surface cannot be carried out to prevent the universal wheel of multi-functional electric medical bed.
8. When using the controller, the button on the control panel can only be pressed one by one to complete the action. It is not allowed to operate the multi-functional electric medical bed with more than two keys at the same time, so as not to cause misaction and endanger the safety of patients.
9. When the multi-functional electric medical bed needs to be moved, the power plug must be unplugged, and the power controller wire must be pushed around it.
10. When the multi-functional electric medical bed needs to be moved, the lifting guardrail should be lifted to avoid injury to the patient from falling during the movement. When the electric bed moves, two people must operate at the same time, so as not to get out of control in the implementation process, causing damage to the structural parts, and endangering the health of the patients.
