The core component of ATM machine is the banknote issuing module, which is an automatic device that integrates electronics and machinery.
Structure of the ATM note-issuing module
ATM banknote issuing module is generally composed of two functional modules: the upper and lower layers: the upper layer is the banknote checking, banknote delivery and scrap recovery module; the lower layer is the banknote box and banknote digging module (composed of 1~4 units with the same structure). The structure diagram is shown in Figure 1.
Check and the function of the note module is dug out by the note module of each note for height, thickness and inclination, by controlling the sorter to the unqualified notes into the scrap box, and qualified bills to the stack, finally by the cash manipulator stack notes to notes, complete a note operation. If the customer does not withdraw the money over time, take the note back and put it in the return box.
The function of the banknote digging module is to place the banknote box and dig out the notes from the banknote box one by one according to the instructions. There are two ways to dig the notes: vacuum suction notes and friction out of the notes. These two methods have their own advantages. Vacuum banknote absorption is accurate and reliable, easy to maintain, but the banknote issuance speed is slow (1~2 pieces / second), currently only used by NCR companies. The advantage of the friction banknote issuing technology is that the banknote issuing speed is fast (5~7 pieces / s), which is adopted by most ATM manufacturers.
Hardware design of ATM note module control system
The main function of the whole control system is to drive the solenoid valve, single, bidirectional motor and stepping motor, to realize the action of all mechanical parts of the entire note module, and the switch quantity input (such as photosensor, micro switch, high and low electric equal) and various physical parameters measurement circuit DC voltage signal (such as single, stacked bill thickness), according to the test results timely adjust the mechanical parts, to ensure the correct, safe and stable operation in the process of customers. At the same time, when the fault occurs during the operation process, it can record the fault state, give the error code, and conduct the corresponding fault processing, so as to provide accurate reference data for the maintenance personnel.





