Nov 07, 2018 Leave a message

Intelligent navigation

Intelligent navigation

In the case of possible navigation, it is like using an electric lawn mower, although the machine can finally complete the task, but the speed of completion may not be fast enough. In addition, the bottom of the ship is generally very large, usually more than 3,000 square meters. In order to ensure that the bottom surface is clean, the ship will simultaneously

Put in multiple HullBUG robot cars. Robots need a system that ensures navigation is coordinated and coordinated. As a result, the company has developed a set of different navigation modes that can help HullBUG achieve effective cleaning of ships. The bottom of the ship will be divided into multiple areas. A large number of algorithms have been accumulated to gradually clean the ship. In addition, complementary algorithms and corresponding sensors are used to ensure effective cleaning of the flat bottom of the ship. In addition, HullBUG can be manipulated via Microsonic Ranged Sonar (MARS).

To this end, the company has also developed a short-range sonar with a concentrated transmit beam so that the robotic car can "see" the front wall or the edge of the sink. Another type of navigation uses microelectromechanical sensor systems (MEMS) to communicate navigation information. There is also a feedback mode that uses an encoder-based odometer. The odometer positions the mobile system based on the data of its propulsion system. The sensor feedback information is extracted from the motor to accurately evaluate the route. The Hall sensor of the motor has been replaced by an auxiliary optical encoder because of its small size and low cost. The Hall sensor is matched to the selected motor/gearbox combination to achieve an accuracy of less than 1 mm for mileage measurement.

Ongoing software development

Once the appropriate motion control system is selected for the self-controlled robotic vehicle and put into implementation, software development will always account for a major part of development costs. One of the higher challenges facing the development team is to design smooth and reliable navigation actions to achieve precise positioning under special environmental conditions. This requires multiple programming to react to different conditions that may occur during the hull cleaning process. The most difficult part of this complex system is the correct architecture of the control logic, extending the navigation behavior.

“Even if you have been working hard for many years, you still need to invest a lot of money in software development,” Mr. Holappa said. “Although the robot car is fully functional, it has to carry out a series of tests on the hull.” Today, robot cars have been able to perform their tasks in areas where no images are drawn under extremely unfavorable conditions. In addition, the car must be able to return to the surface for recycling. This sounds like a very difficult task, but Mr. Holappa is very optimistic: "Not long ago, a technician has accepted the application training and mastered the device in a very short time. The user interface is already included SeaRobotics' unmanned surface vehicle (USV) product line features an intuitive graphical interface that has been proven after hundreds of hours of practical use by several different customers. The car works correctly and the navigation software works fine. The next goal is to build the structure of the interface to make the HullBUG system easier to operate, even for those who are not trained in technical skills.

03(1)

Send Inquiry

whatsapp

teams

E-mail

Inquiry