Use of ink: different printing materials, such as plastic, glass or metal, shall be used with different ink, and the ink shall be stirred before being injected into the oil pan. When the operation is suspended, press the "blank line" key to let the oil scraper system continue to work to prevent the ink from drying. In the process of pad printing, appropriate diluent shall be added from time to time according to the air drying speed of the ink to maintain the proper viscosity of the ink. After the diluent is added, it shall be stirred immediately. If the pad adhesive is stained with dirt, the medical device motor shall be wiped off with cleaning agent. The fixture shall be prefabricated according to the shape of the printed part. After printing, clean the steel plate with cleaning agent and remove the oil roller for cleaning. Safe operation, two people are not allowed to operate a machine at the same time to avoid accidents. The common problems and patterns of monochrome pad printing machine are bubble marks, oil stains on the surface of the rubber head, which are sticky, deteriorated and damaged. The center point of the rubber head is just pressed on the pattern of the point.
