1, The residual space, when the air compressor margin is larger, in the suction gap of high pressure gas expansion and part of the volume, reduce the inhaled volume, reduce the production capacity of the air compressor, if the gap is too small will reduce the production capacity of the air compressor, the gap is small, the piston in the cylinder easily and cylinder end head impact and damage the machine, therefore, the air compressor gap adjustment is appropriate.
2, leakage, air compressor production capacity and piston ring, suction valve and exhaust valve and cylinder seasoning density, is very closely related to the piston ring on the piston and the gap between the cylinder, to prevent the compressor gas leakage to the other side of the piston, therefore, install air compressor piston ring, should make it can expand freely, not only cause a good seal, and do not make the piston and cylinder friction is too big, so that the piston ring lax leak to the other side of the piston.
3. If the air compressor exhaust valve is not tight enough, in the process of inhalation, part of the high pressure in the outlet gas back from the valve is lax, if the suction valve is not tight enough, during the air compressor compression of the compressed gas back into the inlet pipe, in practice, due to the air compressor valve often by gas erosion or bad quality and damage, so the phenomenon of leakage production will often occur, therefore, cylinder seasoning leakage is often encountered in the actual production.
In summary: in order to really master the method of how to use the air compressor and the steps, we need to learn many aspects, master the knowledge, can be very good when we use the air compressor, so can better avoid system failure, there are many times machine failure and problems, mostly because did not master the correct methods and skills, failure will greatly shorten the service life of the air compressor, so it is very necessary to understand and learn the specific steps about how to use the air compressor.
