Open the faucet valve without water leakage phenomenon, plug in the power plug.
Press the washer power key to set the options on the control panel.(Set the water consumption, washing time and dehydration time according to how much of the laundry.) Press the start / pause button to start, and the washing machine enters the working state.
The washing machine inlet water solenoid valve automatically opens to add water to the bucket. The water level sensor detects the water level in the bucket to transmit the water level signal to the control panel. The next —wash is automatically performed when the water level signal received by the control panel meets the set range.
Automatically close the inlet water solenoid valve and stop adding water. The AC universal motor drives the washing machine clutch, and the wave wheel enters the low-speed two-way rotation.
At the set time, the universal motor automatically cuts off, and the wave wheel stops turning. Washing machine drain valve motor power supply at the same time open the drain valve and clutch, into the drain state.
When the washing machine control panel receives the bucket drain completion signal. The motor power supply washing machine clutch is in the open state, the inner cylinder into the high speed one-way rotation, dry clothes.
From washing to dehydration, this cycle of 2 to 3 times (the number of cycles is determined by the set parameters) after the program execution, the washing machine issued a beep alarm. Remove the clothing for completion.
