How to choose the connector and hard wiring?
Connector VS hardwired

1, the first round: flexibility
The connector family offers more user-friendly and professional application options, further enhancing reliability and convenience. Connectors provide good mechanical stability and can be used in a variety of situations, such as high protection, temperature and vibration, weather resistance, durability and multi-terminal options. Most rectangular connectors have a modular structure that users can configure. With different ferrules, each connector can be configured for different signals and power supplies, or a combination of different transmission media: power, signal, fiber, coaxial, D-Sub and pneumatic. Recent innovative applications, such as the quicklock wiring module, click-to-connect and top twist locks make installation and maintenance faster and easier than ever.
Most industrial equipment, whether indoor or outdoor, contains a large amount of electrical wiring between components and subsystems. When equipment is produced, OEM equipment manufacturers typically assemble and test at the factory, then disassemble, transport, and assemble at the customer's site. The use of hardwired means that each connection needs to be dismantled (usually hundreds of connections) and transported to the customer's site before it is installed, which requires a lot of labor. If a wiring error occurs during the final installation, it may cause damage during startup of the equipment, or cause production delays and a large additional cost to diagnose and correct the error.
2, the second round: modular design
Connector-based cabling is better than hardwired at every stage of the product lifecycle.
Connector wiring complements the modular mechanical design. Modular, equipment and plant systems consist of interconnected functional modules that are more economical and efficient than traditional single design methods. Standard components, such as control panels, motor components, and power distribution boxes, can be pre-installed, with the final assembly plugging the predictor and connector together.
In the past, fiber optic cables, pneumatic hoses, and electrical wiring were connected to printheads and other components, such as ink dispensers, through jackets and hardwires. However, disassembling the print head is always an important task. By integrating these inputs in a modular connector, the printhead can now be quickly disassembled and reconnected for faster assembly and repair. For example, HARTING's Han-Power®T connectors allow the motor to be installed or replaced with plug-and-play operation, greatly reducing the risk of downtime or wiring errors.
3, the third round: space utilization
Prefabricated connector wiring assemblies allow for accurate, repeatable measurement of cable length. Connector-based harness connections can be completed by low-wage workers or contractors without the need for electrical assembly, saving costs. When installed, they require very few rigid or semi-rigid conduits to protect point-to-point wiring from damage and will require extensive rewiring if damage occurs. Individual power supplies and signals can be individually configured to accommodate different DC voltages or AC/DC power supplies due to frequent changes in power and signal. Otherwise, installing multiple terminals in a control cabinet requires additional labor and materials and takes up more space. Another example of labor saving: HARTING's Han-Yellock® connector requires only a male connector. By using a multi-head ferrule inside the connector, the electrical incoming wire for each wire can provide up to five contacts.
4, the fourth round: cost
Why are OEMs using hardwiring? The reason is that manufacturers are afraid to make major changes in the process. Others may not fully understand the cost of on-site assembly of hard-wired systems. They believe that connectors are an extra option in the bill of materials and their customers are only willing to buy at the lowest price. However, most OEMs have found that connectors are more time- and money-saving by comparing hard-wired connectors and connectors. Most of the wiring costs of connectors occur only once. Compared with hard-wired, errors may occur due to each wiring. Hard-wired cabling costs are frequent and unpredictable. Experience has shown that no matter how much internal hard-wired costs a company has, future installations or warranty services and repairs require an additional 30%.





