How the high pressure cleaner works
The impact of water is greater than the adhesion of dirt to the surface of the object, and the high-pressure water will peel off the dirt and wash away to achieve a cleaning device for cleaning the surface of the object. Because it is the use of high-pressure water column to clean the dirt, unless it is very stubborn oil stains need to add a little detergent, otherwise the foam generated by strong water pressure is enough to take away the general dirt. According to the outlet water temperature, the high pressure cleaner is divided into two categories: cold water high pressure cleaner and hot water high pressure cleaner. The biggest difference between the two is that a heating device is added to the hot water washer, which usually uses a combustion cylinder to heat the water. The use of hot water cleaning can quickly flush a large amount of dirt and oil stains that are not easily washed by cold water, and the cleaning efficiency is greatly improved. However, because hot water washing machines are expensive and operate at high cost (because diesel is used), most users may choose ordinary cold water high pressure cleaners; of course, in order to improve cleaning efficiency and effectiveness, many professional customers will choose Hot water washing machine. According to the drive engine, the motor drives the high pressure cleaner, the gasoline engine drives the high pressure cleaner and the diesel driven washer. As the name implies, all three washers are equipped with high-pressure pumps, except that they are connected to a motor, a gasoline engine or a diesel engine, respectively, thereby driving the high-pressure pump to operate. The advantage of a gasoline engine driven high pressure cleaner and a diesel driven washer is that they can work in the field without the need for a power source. According to the purpose, it is divided into three categories: household, commercial and industrial. First, the domestic high-pressure cleaner, the general pressure, flow and life is relatively low (generally within 100 hours), the pursuit of carrying light, flexible, easy to operate. Second, commercial high-pressure cleaners have higher requirements on parameters, frequent use, and long service life, so the general life is relatively long. Third, industrial high-pressure cleaners, in addition to general requirements, often have some special requirements, water cutting is a good example.
