Ac motor and type
Ac motor is divided into synchronous motor and asynchronous motor, synchronous motor is used for generators, asynchronous motor is used for motors.
The shell of the motor is the stator, the stator has a three-phase symmetric AC winding, because the three-phase electric sequence changes, the formation of a rotating synthetic magnetic field, the rotation speed of the magnetic field is synchronous speed. The synchronous speed n= 60F/P, F is the frequency, and P is the polar logarithm. For example, for a two-pole motor connected to the national grid at 50Hz (that is, the polar logarithm is one pair), then the speed n=60*50/1= 3000R /min. Similarly, the synchronous speed of 4-pole, 6-pole and 8-pole motors is 1500, 1000and 750.
Ac motor - asynchronous motor
The induction motor is simple in structure and the rotor is a closed coil, such as squirrel cage. The rotor coil will cut the rotating magnetic field, generate the induced electromotive force, and then generate the induced current, and finally generate the rotating magnetic field, so the rotor becomes an electromagnet, will follow the stator magnetic field rotation, so the rotor speed must < the stator rotating magnetic field, so as to cut the magnetic induction line. That is, the asynchronous speed of the rotor < synchronous speed, rotor and stator magnetic field speed difference, so it is called asynchronous motor. The rated speed of asynchronous motors produced by different manufacturers is slightly different. The 2-pole motor is about 2800+ R /min, and the 4-pole, 6-pole and 8-pole asynchronous motors are about 1400+,950+ and 700+. Asynchronous motor speed is high when there is no load, and the speed decreases when there is load.
Asynchronous motors are widely used because of their simple structure, convenient maintenance, reliable operation and low price.
Ac motor - synchronous motor
If the rotor speed = the speed of the stator magnetic field rotation, it becomes a synchronous motor, at this time, it is necessary to turn the stator into an electromagnet or permanent magnet, that is, the stator is energized, at this time, no need to cut the magnetic line can rotate, the rotation speed and the magnetic field rotation speed is the same, that is, the formation of synchronous motor. Synchronous motor rotor structure is more complex than asynchronous motor, the price is high, in the production and life is not as widely used as asynchronous motor, mainly used as a generator, now thermal power station, hydropower station, steam turbine, turbine are basically synchronous motor.






