We are a professional motor factory and also include professional production of high-speed motors. As more and more widely used, the maintenance of high-speed motors should also be paid attention to. For high-speed motors, the general method of repairing ordinary motors may not be able to repair them. After repairing, they may not be able to be used for a long time. According to the domestic and foreign practical experience. Introduce the different maintenance methods for high-speed motors with a speed of 20000RPM and general low-speed motors. Folding and dismantling method:
A high-speed motor generally has a cooling wind dysentery at one end, and there may be a magnet or speed ring for speed measurement at the other end The speed measuring magnet is damaged. Secondly, there should also be a mark between the fan bushing or the magnetic steel bushing and the shaft, so that it can be installed according to the original mark position after repairs. It is made of steel), so it must be assembled according to the symbol of disassembly when assembling. This is an insignificant trivial matter in the general motor repair, and the I side can be of great concern in the repair of high-speed motors. Because once the speed measuring ring or fan blade is damaged or the segment is assembled according to the mark, even if the other parts are repaired well. After assembly, it may cause unbalanced vibration of the whole machine during high-speed operation.
Do not use hammers, punches, etc. when disassembling the high-speed motor. Use a puller for hard knocking and prying. Pay attention when using the puller: the top of the puller should be directly on the top eye. It should be the same as the top eye of the puller A protection pad is used to protect the tip eye on the armature shaft from damage.






