Drilling technology for 500 Micro Dc Motor
When using a 24V DC motor, it is necessary to drill the hole. Only the drill hole can be used for it. For you to briefly introduce the drilling technology of the device:
Level: Each blasthole is parallel to each other. When the 24V DC motor is drilled, the inclination of the top eye should not exceed 3.
Straight: each blasthole should be straight to the axis direction of the roadway; 24V DC motor is mainly, its high speed shaft speed does not exceed 1500r/min; the gear peripheral speed does not exceed 10m/s; the working environment temperature is -40°C~45°C; Two-way operation, deceleration of machinery and equipment such as metallurgy, mining, lifting and transportation, below 0 °C, the lubricating oil should be preheated before starting, above 45 °C, cooling measures should be taken.
Qi: The blasthole error of the same depth shall not exceed 50m to ensure a neat and substantially vertical working surface after blasting; the blasting chart after the rock hardness adjustment shall be strictly controlled to control the amount of charge, especially the peripheral eyes shall not be overloaded.
