Desk electric fan does not turn
In this case, there are several common reasons. The first one is that the plug of the electric fan is not completely contacted. Although the plug of the electric fan is inserted in the plug-in board, the fan may not work due to the poor contact of the circuit. At this time, what we need to do is to cut off the power source, pull out the plug of the electric fan again, and then insert it into the plug-in board. We can see the electric wind by opening the switch again If the fan is working, it can be proved that the reason just mentioned is correct. If it is still not working, the reason for poor circuit contact can be eliminated. The second reason may be that the motor coil inside the electric fan is damaged. The motor coil is equivalent to the rotor of the electric fan, and the rotation of the electric fan is completely driven by the motor coil. If the motor coil is damaged, the electric fan, such as warning light, can work normally even when it is powered on, but the fan does not rotate and makes a buzzing sound. In this case, the user can use a tool to disassemble the electric fan, and use a household electricity meter to test the resistance value of each gear of the electric fan. It should be noted that this process is carried out when the power is cut off. If the power is not cut off, electric shock may occur. If the resistance value of each gear is about tens of ohms, it means that the motor coil of the electric fan is in good condition. Otherwise, it is damaged and needs to be replaced.






