Dec 04, 2018 Leave a message

DC series DC traction motor maintenance instructions

DC series DC traction motor maintenance instructions

Motor structure

1. The motor is a series-excited DC motor, which is mainly composed of a stator, a rotor, a brush cover and a drive cover.

2, the motor is divided into fully enclosed and open type. The fully enclosed type prevents the entry of foreign matter, dust and water, and the open type makes it easier to maintain the commutator and brush replacement.

3. The armature wires and commutators are all welded by TIG, which is reliable in connection and can be used in various harsh working environments.

4. The specific shape and technical parameters refer to the requirements of the layman or the order form.

Motor wiring (string excitation)

Motor maintenance

1. The user must follow the instructions to ensure the normal operation of the motor.

2. The motor should be stored in a ventilated, dry and clean place. If the storage time is too long (six months), check the grease of the motor and its cold insulation resistance. The resistance is not less than 0.5MΩ. It must be dried and placed in an oven at a temperature of 80 ° C ± 10 ° C.

3. Before installing the machine, check whether there is a bearing at the extension end of the motor shaft (the shaft can be manually swayed, the shaft is yawed, there is no bearing), the motor shaft has no bearing at the end, and the motor axis and the motor end cover must be guaranteed. The outer joint (or the base stop) has a coaxiality of no more than 0.1 mm. Check whether the armature is flexible and not rubbed after installation.

4. Check if the motor connection is reliable.

5. Check the surface of the commutator for dirt, and the brush slides freely inside the brush box.

6 This motor (string excitation) is not allowed to run energized under no-load conditions. If the user must run at no load, the voltage at the terminal must be controlled to less than 15% of the rated voltage.

7. The cooling air should not have corrosive gases.


TW-7712D

Send Inquiry

whatsapp

teams

E-mail

Inquiry