The company sells special meat mincer motor, generally speaking, meat machine fever is normal, because this kind of motor is a series of motor, high speed, high power. As long as you don't block the air inlet and outlet of the meat grinder, there is generally no problem. Because the meat is relatively hard, so it is best to fix the fuselage with a screwdriver and other tools to help the firm, in order to prevent the machine loose in the process of work. After each use, clean meat grinder should be placed in the form of pieces in the wooden cabinet. Wait for it to dry completely before assembling, not immediately assembling.
Note the following:
1. Check whether the parts of the meat grinder are complete and whether the parts of each part are installed in place before use.
2. Switch on the power supply and check whether the machine is running normally.
3. Ensure that the machine does not have any fault before putting the meat into the meat grinder for operation. The meat must be cut into a rectangle of 20CM and 3CM wide.
4. During operation, hands should not be close to the meat inlet, and the distance between hands and meat inlet should be more than 15CM. Within 15CM is the danger zone, tools must be used in the danger zone, and the length of special tools must be more than 20CM
