Dec 26, 2018 Leave a message

Comprehensive Benefit Analysis of Permanent Magnet Synchronous Motor Replacing Asynchronous Motor

Comprehensive Benefit Analysis of Permanent Magnet Synchronous Motor Replacing Asynchronous Motor

The permanent magnet synchronous motor is composed of a stator and a rotor, and the stator is the same as the asynchronous motor, and is composed of a three-phase winding and a stator core. A pre-magnetized (magnetized) permanent magnet is mounted on the rotor, and a magnetic field can be established in the surrounding space without applying external energy, which simplifies the structure of the motor and saves energy. This paper starts from the characteristics of permanent magnet synchronous motor and combines the practical application to expound the comprehensive benefits of permanent magnet synchronous motor.

Outstanding advantages of permanent magnet synchronous motors

(1) Since the rotor is made of a permanent magnet, the magnetic flux density is high, excitation current is not required, and excitation loss is eliminated. Compared with the asynchronous motor, the excitation current of the stator side winding and the copper and iron loss of the rotor side are reduced, and the reactive current is greatly reduced. Since the stator and rotor magnetic potentials are synchronized, the rotor core has no fundamental wave iron loss, so the efficiency ( The relationship between active energy and power factor (reactive reactive energy) is higher than that of an asynchronous motor. Permanent magnet synchronous motors are generally designed for high power factor and efficiency even at light load operation.

The figure above is a comparison curve between the efficiency and power factor of a permanent magnet synchronous motor and the same specification asynchronous motor. From the change of the load of the motor, the rare earth permanent magnet synchronous motor can maintain high power factor and high efficiency in the range of 25% to 120% of rated power, while the general three-phase asynchronous motor can only be rated at 60%~100%. Power is maintained.

(2) Permanent magnet synchronous motor has hard mechanical characteristics and has strong bearing capacity for motor torque disturbance caused by load change. The permanent magnet synchronous motor rotor core can be made into a hollow structure to reduce the rotor inertia, and the start and brake times are much faster than the asynchronous motor. The high torque/inertia ratio makes the permanent magnet synchronous motor more suitable for the fast response condition than the asynchronous motor. Run below.

(3) The size of the permanent magnet synchronous motor is greatly reduced compared with the asynchronous motor, and the weight is relatively reduced. The permanent magnet synchronous motor with the same heat dissipation condition and insulating material has a power density greater than 2 times that of the three-phase asynchronous motor.

TW-49TYD

(4) The rotor structure is greatly simplified, which is easy to maintain and improves the stability of operation.

If you want to buy a food processing processor motor, please pay attention to high torque blender motor.

Send Inquiry

whatsapp

teams

E-mail

Inquiry