China Electric mixer Motor, from the perspective of stirring mechanism, it is due to the existence of fluid velocity difference, so that each layer of the fluid is mixed with each other, therefore, every stirring process always involves the fluid shear rate. Shear stress is a force that is the real cause of bubble dispersion and droplet breakage in agitation applications. It must be pointed out that the shear rate of the fluid at each point is not uniform throughout the stirred tank. The study of shear rate distribution shows that there are at least four kinds of shear rate values in a stirred tank. They are as follows: Experimental study shows that the maximum shear rate and the average shear rate increase with the increase of rotational speed when the blade diameter is constant regardless of the blade type.
However, the relationship between the maximum shear rate and the average shear rate and the blade diameter is related to the blade type when the rotation speed is constant. When the rotation speed is constant, the maximum shear rate of radial blade increases with the increase of blade diameter, while the average shear rate is independent of blade diameter. These concepts of blade zone shear rate require special care in blender reduction and magnification designs. Compared with the large one, the small one has the characteristics of high speed (N), small blade diameter (D) and low tip velocity (ND), while the large one has the characteristics of low speed (N), large blade diameter (D) and high tip velocity (ND).
Mixer is a machine in which a bladed shaft rotates in a cylinder or tank to stir and mix various ingredients into a mixture or a suitable consistency. Mixer is divided into a variety of forced mixer, single horizontal shaft mixer, double horizontal shaft mixer and so on.






