The thermal insulation of Beijing wind turbine is to weld the bracket directly on the side plate of the fan casing, and the temperature inside the fan can be directly transmitted to the outside of the thermal insulation layer. In general use, such a structure can keep the temperature at normal temperature. However, in case of high temperature above 250 ° C or low temperature below 0 ° C, the thermal insulation outer layer can control the external temperature and The difference of internal temperature can not meet the temperature difference requirement of 50 ° C between the external temperature and the internal temperature of the fan, that is to say, the function of the existing thermal insulation structure of the fan is limited under the abnormal temperature condition. And meet the need of maintenance, the traditional insulation structure disassembly is very troublesome, not only cost money, but also delay efforts.






