China Big Power Mixer Motor,How to start the high-power motor? High-power motor can be started by full pressure, that is, through the power supply voltage of the switch or the contactor is directly added to the stator winding of the motor, so as to start the motor, its start mode is simple, can be through the air switch, the circuit breaker, etc., to realize the motor close operation and control.Because the starter current will reach 4 to 7 times of the rated current during the no-load start, the following problems will be caused in the full-pressure start of the high-power motor. 1. The starting current is too large, causing the grid voltage decline and voltage fluctuation, which will not only affect the grid voltage drop and voltage fluctuation, not only affect the normal work of other power equipment in the power grid, but also have a certain impact on the power transformer. 2. The starting current over the motor produces a great impact force on the stator coil and the rotor rat cage, which is likely to destroy the insulation of the winding, cause the fracture of the rat cage strip, and cause the motor failure. 3. The general assembly of the starting current makes the motor winding heat up quickly, thus damaging the winding insulation and reducing the life of the motor. 4. When the starting torque of the motor is directly started by full pressure, it is twice the rated torque, which will cause a certain impact or even a loss on its dragging machinery.






