May 21, 2019 Leave a message

China 24v gear motor manufacturers talks about why the micro gear motor gear will leak oil?

China 24v gear motor manufacturers talks about why the micro gear motor gear will leak oil?

Under what circumstances will the micro gear motor have oil leakage? There are four conditions below that can cause oil spills.

First, the incorrect maintenance process, in the equipment maintenance, due to the incomplete removal of dirt on the joint surface, or the improper selection of sealant, the reverse direction of the seal, the replacement of seals in time, etc. will also cause oil leakage.

Second, the quality of the micro geared motor is poor, so when choosing a miniature geared motor, you should go to a regular company with good quality.

3. The differential pressure is generated inside and outside the micro gear motor. During the operation of the micro gear motor [gear motor: geared motor], the friction of the motion pair is affected by the ambient temperature, so that the temperature of the reducer rises. If there is no vent or vent hole Then, the pressure inside the machine gradually increases. The higher the temperature inside the machine, the greater the pressure difference from the outside world, and the lubricating oil leaks from the gap under the pressure difference.

4. Excessive fuel quantity. During the operation of the micro gear motor, the oil pool is agitated very much. The lubricating oil splashes everywhere in the machine. If the oil quantity is too much, a large amount of lubricating oil will accumulate in the shaft seal, joint surface, etc. At the place, causing a leak.

 TW-32B300


Send Inquiry

whatsapp

teams

E-mail

Inquiry