The cheap motor also includes the frame composition. The frame is the basic part of the filter press. The two ends are the thrust plate and the compression head. The girders on both sides connect the two together, and the girders are used to support the filter press. Machine filter cloth plate, filter frame and pressing plate. In order to meet the needs of high-level hygiene, the rack needs to be covered with stainless steel. Thrust plate: It is connected with the support to place one end of the filter press on the foundation. The middle of the thrust plate of the chamber filter press is the feed hole, and there are four holes in the four corners. The holes in the upper two corners are Washing liquid or squeezed gas inlet, the lower two corners are the outlets. Pressure plate: used to compress the filter frame of the filter plate, the rollers on both sides are used to support the pressure plate to roll on the rail of the beam. Beam: It is a load-bearing component. According to the requirements of the use environment, it can be coated with rigid PVC, polypropylene, stainless steel or new anti-corrosion coatings.
