Buy a food processing motor, the method of detecting and replacing the switch below: Step 1: Gently remove the hood of the switch to expose the back of the switch. Step 2: Check the terminals of the switch to ensure that the wires in the electrical appliance are intact on the switch. Step 3: Mark the terminal position of the wire and disconnect them. Step 4: Determine if the switch is faulty using the shutdown detector or the multimeter. If so, replace the switch and reconnect the wire. Repair Speed Controller: The speed of the food mixer is controlled by changing the current transmitted to the motor. The smaller portable mixer adopts a speed switch that includes a lot of electrical contacts, each of which increases the current transmitted to the motor. The larger mixer uses variable resistors to control current. No matter which type of speed controller, you can check with the interworking detector or multimeter. Sometimes the cleaning contacts are also conducive to improving performance. However, in many cases, problems caused by speed controllers can only be solved by replacement. Maintenance gear: It is useful for food mixers because their agitator rotates in the opposite direction, so that the feedstock can be effectively mixed. This opposite rotation is generated by the gear. Most of the food mixer is connected to a worm gear on the motor shaft and two or more pinions of the worm gear. The pinion is further driven by the agitator. Since the gear belongs to the physical component rather than the electric component, the maintenance method is different.






