Buy a 3D printer motor. Like other mechanical equipment, the motor is a key component to power the 3D printer. Because the X, Y and Z axes of 3D printers do different jobs, the motors used are also different. If you choose the wrong stepper motor for a 3D printer, it will greatly affect its printing work. So what kind of motor should a 3D printer use? We can consider it from the following four aspects:
(1) Current 42 stepper motors are enough for desktop-level 3D printers. If there are no special requirements, 1.5A current is ok.
(2) Axis diameter General 3D printers are driven by the use of synchronous belt, the need for synchronous wheel and coupling, so the diameter of the motor shaft is generally about 5mm.
(3) Motor drive motor drive quality, heat dissipation will be better, can withstand greater current. The current motor drive is generally A4988 motor drive chip, manual welding is often poor quality, it is recommended to use SMT machine welding.
(4) The heating motor will heat up after starting to work, and the heating will be more severe when the current increases. If the heat is too large, the motor will stop or lose step, so we should choose the motor of good quality. Those motors with poor quality are easy to heat up and cannot meet the long-term printing requirements of 3D printers, so don't try to be cheap when choosing 3D printer motors.






