Preventive measures for safety removal of safety wall by wall dismantling machine:
Walls connecting the balcony should not be removed.
To improve the lighting of the room, some owners removed the walls connecting the balcony and increased the width of the balcony doors. This is not allowed. Because the exterior wall of the house is usually load-bearing walls, even if you are very dangerous to open a hole in the window.
In addition, some walls between the room and the balcony initially have a window and a door. These doors and windows could be removed, but the walls below the windows cannot be removed. The walls of the window are called the weight walls, which play the role of a balcony. If the walls are removed, the load-bearing capacity of the balcony will decline, causing the balcony to fall.
It is forbidden to dismantle the load-bearing wall
Many people know that the load-bearing wall cannot be removed during the decoration. Weight-bearing walls are walls without prefabricated ring beams. The wall thickness of the bearing wall on the plan is obviously thicker than that of the non-bearing wall. The thickness of solid wall is generally 24 cm, and the thickness of non-bearing wall is 10~15 cm. Exterior walls are usually load-bearing walls, and the walls shared with the neighbors are also load-bearing walls. General non-load-bearing walls are in bathrooms, storage rooms, kitchens, and aisles.
In short, rebuilding the structure of the house to demolish the wall machine will inadvertently affect the structural safety of the house. If the owner carries out the structural transformation of the house, it is necessary to check the construction structure design drawing, to see whether it is a load-bearing wall, and to consult the relevant professionals before the construction.
