Bearing assembly is the key to motor manufacturing, which determines motor performance and even life.
After a certain type of permanent magnet motor test is verified, it is proposed to dismantle the rotor to check the magnetic steel. However, it is found that the bearing removal tool cannot be extended because the inner cavity of the housing is too compact. The master of the assembly will take the "Shenli" directly and knock it down. Ms. See the form immediately.
Bearing disassembly
Bearing disassembly is a very delicate activity, and the simple and rude practice of the assembly master will undoubtedly leave a fatal hazard. Ms. participated in the production of a set of simple disassembly tooling, with the "screw, nut" easy to get. In addition, the bearings are very precise parts, and should avoid avoiding strong impacts such as impact and rust.
Preparation before installation
●Before installing the bearing, you must first prepare a clean and dry work place, tools, measuring instrument, lubricant and clean rag. In particular, when installing miniature, small ball bearings, and precision bearings, if garbage or foreign matter is mixed, the performance of the bearing will be greatly affected. Therefore, the installation work is preferably carried out in a clean room.
In addition, the smudges, burrs and metal shavings on the shaft, bearing chamber and other related parts and installation tools should be removed before the bearing is installed. At the same time, check the dimensional accuracy, shape accuracy and roughness of the bearing mounting surface to ensure that it is within the tolerance.
● Bearings must be unpacked before installation. Usually, when using grease lubrication, it can be directly installed without using a rust preventive. However, when using oil lubrication, even in the case of using some grease lubrication, the rust inhibitor on the bearing must be cleaned with a clean washing oil, until the washing oil is completely dry or the washing oil is completely wiped clean. Installed to prevent the lubricant from mixing with the rust inhibitor and affecting the lubrication function.
Tip: Do not clean bearings with double-sided dust caps and seals.
If you want to buy a food processing processor motor, please pay attention to electric printer motor.





