Jan 04, 2019 Leave a message

Basic type of motor frame

As the key components of the motor, the frame's rationality and processing technology have great influence on the performance of the motor; the unsuitability of the motor's broom, low-frequency electromagnetic sound, vibration, etc. is mostly related to the machining of the machine base. Therefore, the structure of the base should be reasonably selected in accordance with the performance requirements of the motor and processed according to the technical requirements to reduce and eliminate the non-conformity caused by the machining of the base. Ms. Participate in today's motor frame type and some of the most basic technical requirements and share it with you.

Basic type of motor frame

● According to whether the base is magnetic or not, it can be divided into magnetic and non-magnetic magnetic bases. The magnetic base is used for DC motors and pivot-type synchronous motors. Non-magnetic housings are used in asynchronous motors, rotary synchronous motors and other motors with laminated stator cores.

● According to the different blanks of the machine base, it can be divided into welding and casting machine bases. The welding base is welded from steel. The casting machine base can be cast in cast steel, cast iron or aluminum alloy; the magnetically permeable stand is almost welded steel or steel plate.

● Non-magnetic magnetic bearings are generally made of gray cast iron. The cast iron frame has low cost and convenient processing, and its mechanical strength can meet the requirements of general small and medium-sized motors. High-strength cast iron or cast steel stands are only used where high mechanical strength is required, such as explosion-proof motors and marine motors.

● Small AC motors and micro motors have been gradually die-cast in aluminum-silicon alloy or aluminum-magnesium alloy in recent years. The structure is characterized in that the aluminum alloy can be directly cast on the stator core, the inner circle of the base does not have to be processed, some fasteners are omitted, and the small motor can be made lighter. The disadvantage is that the material price of the aluminum alloy is relatively high, the mechanical strength is weak, and the wear resistance is poor.

● For large motors, due to the small output and large motor weight, steel and steel plate welding stands have been widely used. Compared to cast iron stands, the weight of the welded base is lighter under the same mechanical strength and structural rigidity. When welding, no special mold is required, and the cost is relatively low, the production cycle can be shortened, and the individual shape of the motor can be satisfied.

● According to the structure of the base, it can be divided into an integral frame and a separate frame.

The structural rigidity of the separate frame is weak, and the processing time is more. If the assembly is improper, the whole machine will not meet the requirements. However, its unique advantages are that it is easy to install and repair. When the design is reasonable, the assembly accuracy and structural rigidity are no longer the constraints.

The integral frame is relatively more used, and the section is generally designed to be cylindrical. There are two or four feet in the lower part of the base, and the power supply is installed. The cylindrical frame has the best processability, but for some motors, the frame section is often designed as a polygon to minimize the space because the dimensions are limited by certain conditions and the power is required to be as high as possible. The manufacturing of the polygonal base is complicated and the processing cost is also increased.

● Other classification methods. According to different protection and cooling methods, the base can be divided into open type, protective type, closed type and explosion-proof type. The outer surface of the enclosed and explosion-proof frame generally has a heat sink, while the other bases do not have a heat sink. According to the presence or absence of feet, it can be divided into bases with feet (such as B3 and B35) and without feet (such as V1 and B5).

TW-UM6320

Send Inquiry

whatsapp

teams

E-mail

Inquiry