Micro DC motors can be used in various pump body series, such as water pumps, air pumps, peristaltic pumps, etc., and are usually very common in various beauty instruments, micro-flow analyzers, automatic water pumps, and kettle water pumps. At the output shaft of the DC motor, the micro DC motor rotates at a high speed to inhale and discharge water or gas. What are the advantages of micro DC motors for pump bodies? The following is a brief introduction of Tianfu Micromotor.
The pump body series DC motor is usually composed of a micro-motor body and a driver. It is a typical mechatronic product. The common pump body DC motor models are RF130\TF130\N20\M200, etc. According to the performance requirements of the product, there are The brushless DC motor can also be used as a brushless DC motor. The basic difference between a brushless DC motor and a brushed DC motor is that the brushless motor adopts electronic commutation, and there is no brush and commutator device, that is, an electronic sensor is used to replace the brushed DC motor. contact motor and commutator. Although it has higher speed, lower noise, and longer service life, it has higher cost and complicated control. Generally, DC motors for pumps such as household beauty instruments or water pumps are rarely used, and most of them use Brushed DC motor.

Pump body series DC motor advantages
1. Long service life, the carbon brush DC motor can reach 800~1000 hours, which can fully meet the various requirements of the micro pump body. If the large pump body needs to run continuously for a long time, the brushless DC motor needs to be used;
2. Low interference, the miniature DC motor will not interfere with the nearby electronic components, and will not have any interference with the control circuit, making its control precise;
3. The temperature rise is low, the micro DC motor does not generate heat like the large motor, and needs water cooling or air cooling to cool down. As long as the micro motor does not stall, the DC motor will not heat up;
4. The control is simple. The micro DC motor can directly change the input DC voltage with the circuit board to change the speed. It is very simple. If you need precise speed regulation, you only need to install an encoder. If a brushless motor is used, multiple Hall sensors need to be used for speed regulation;
5. Low cost, the price of micro-pump carbon brush DC motor is only 2~5 yuan. For micro-DC motor manufacturers, the more orders in one time, the lower the price. Some types of motors can be 0.9~1.8 yuan. One, if you use a brushless DC motor, the price and cost may be 2~3 times that of a brushed DC motor.






