Analysis of Moment Frequency Characteristic Curve of Stepping Motor
The stepping motor is an induction motor. Its working principle is to use electronic circuit to supply power when the DC power is changed into components. The multi-phase timing control current is used to supply the stepping motor with this current, and the stepping motor can work normally. The driver is a time-sharing power supply for the stepper motor, multi-phase timing controller.
Although stepper motors have been widely used, stepper motors are not as conventional DC motors, and AC motors are used under normal conditions. It must be composed of a dual ring pulse signal, a power drive circuit, etc. to form a control system. Therefore, the use of stepper motors is not an easy task. It involves many professional knowledge such as machinery, motors, electronics and computers. As an actuator, stepper motor is one of the key products of mechatronics and is widely used in various automation control systems. With the development of microelectronics and computer technology, the demand for stepper motors is increasing day by day, and it has applications in various national economic fields.
The same stepper motor, even the same manufacturer, its hard characteristics are different, applicable occasions are also different. How do we choose a stepper motor? The most important thing is to obtain the moment frequency characteristic curve, preferably a set of curves under different driving voltages. For the stepping motor, as long as it is turned up, the driver parameters are fixed, regardless of the speed, the power consumption difference is small, the output power is very different, that is, the efficiency gap is large, if we use the motor often Under low-efficiency conditions, the power loss part is heated, the lower the efficiency, the more heat is generated, which is not conducive to the life of the motor.






