1. Analysis of high efficiency motor performance
1.1 Measures and methods to reduce motor loss
(1) Measures to reduce the copper loss of the motor
The copper loss on the stator side is related to the stator current and the resistance of the winding.
The common method is to increase the winding cross-sectional area to reduce the winding current.
Resistance, reduce the density of electricity, this method is subject to many aspects of the slot full rate and other checks and balances. Therefore, when the high-efficiency energy-saving motor is developed, some specifications enlarge the outer diameter of the punching piece, and the purpose is to increase the groove area.
More copper wire. In addition, the resistance of the entire winding can be reduced by improving the end design of the winding and reducing the length of the end.
Most of the current motors are cast aluminum rotors. Copper has a higher electrical conductivity than aluminum, and the theoretical rotor loss of a cast copper rotor can be reduced by 38%. Motors with cast copper rotors can greatly improve motor efficiency.
(2) Measures to reduce iron consumption
The most common way to reduce iron loss is to use high-quality silicon steel sheets with high magnetic permeability and low loss. In addition, the thickness of silicon steel sheet is one of the important factors affecting the iron loss of the motor. The domestic mainstream silicon steel sheets are 0.5mm thick, and many foreign products have begun to use 0.35mm or even 0.27mm thick silicon steel sheets. As the thickness of the silicon steel sheet is reduced, the magnetic properties are also improved.
Reducing the iron loss of the motor In addition to rationally designing the magnetic circuit of the motor, it is also necessary to consider the influence of the manufacturing process of the motor core. Generally, the silicon steel sheet is processed into a core and pressed into the machine base, and the iron consumption is greatly increased. At present, the commonly used sheet annealing process is annealed after punching and punching to eliminate stress and restore the good performance of the cold-rolled silicon steel sheet. Iron consumption has played a very good role.
(3) Measures to reduce mechanical losses
Mechanical losses are divided into ventilation losses and friction losses. By optimizing the air path structure and improving the design of the fan and the hood, the ventilation loss can be effectively reduced; the friction loss can be reduced by measures such as high quality low friction bearings and low friction grease.
(4) Measures to reduce stray loss
Spurious losses can be reduced by optimizing the design and process. The design adopts optimized air gap, adopts low harmonic winding, optimizes slot matching, etc.; the rotor groove is insulated in process to reduce the high frequency lateral current loss of the rotor, and the punched air gap is used instead of turning air gap to reduce the rotor surface. High frequency loss, etc. In addition, solid parts such as motor end caps can use non-magnetic materials to limit eddy current losses caused by leakage magnetic fields.






