Medical pump motor

Medical pump motor

The medical pump motor is a kind of equipment specially used in the medical field. It mainly drives the piston of the pump body through the rotation of the motor to enter the medical solution or physiological saline into the patient's body. It adopts precise technology and materials to ensure efficient, reliable and stable operation. The medical pump motor is highly flexible and can be set according to different drugs and treatment plans, effectively controlling the dosage and infusion speed, thereby ensuring the safety of patient treatment. At the same time, medical pump motors have the characteristics of low noise, simple maintenance, and easy use. They can greatly improve the quality of hospital care and patients' treatment experience, and are an indispensable part of modern medical technology.

1.Product Introduction

Synchronous motor 48 is an efficient, reliable and safe electric motor. It adopts synchronous operation technology, which can achieve efficient and stable speed control according to the grid frequency. It also has high power density and small size, making it widely used in modern industrial fields. Synchronous motor 48 has the advantages of good speed regulation performance, high efficiency and energy saving, accuracy and reliability, low noise, and long service life. It can improve production efficiency, reduce energy consumption for enterprises, and contribute to social energy conservation and environmental protection.

2. Product Parameter 

3. Product Feature 

1. Efficiency. The synchronous motor 48 has efficient power output and can provide greater power output with less power loss. In comparison, traditional asynchronous motors often cause large power losses and waste of electrical energy.

2. Stability. Synchronous motor 48 uses advanced control technology to achieve high-precision speed, steering and load control. These features make it perform well in a variety of complex application scenarios and can better adapt to different mechanical and electrical loads.

3. Low noise. The operating noise of the synchronous motor 48 is low because its rotor can operate in a stable magnetic field, reducing the generation of electromagnetic noise and mechanical noise. This feature makes the synchronous motor 48 particularly suitable for applications where quietness is required.

4. High precision. The synchronous motor 48 has high control accuracy and can achieve relatively precise position, speed and acceleration control. This feature makes synchronous motor 48 widely used in industrial automation and other fields.

5. High reliability. The synchronous motor 48 is highly durable and can withstand high mechanical and electrical loads. At the same time, its structure is simpler than the traditional asynchronous motor. Since some mechanical parts are reduced, the failure rate is lower and the reliability is higher.

4.Application 

They usually apply to automatic machine, medical equipment/vending machine .etc

5. Production Details 

6.Maintenance and care methods

1. Regular cleaning

Medical pump motors should be cleaned regularly to prevent dust or other dirt from corroding the pump motor or disrupting the normal operation of the pump motor. Cleaning of the pump motor should be done with a dry cloth or a mild tool such as a hair dryer. Avoid using a hard cleaning brush to avoid scratching the pump motor casing.

2. Regular lubrication

In order to ensure the normal operation of the motor bearings and gears, some lubricating oil needs to be added regularly. When selecting lubricating oil, you should pay attention to the fact that the viscosity of the oil meets the requirements. For lubricating oil that oxidizes and sublimates, it should be replaced in time.

3. Check the circuit

During the operation of the medical pump motor, necessary circuit inspections are also required to see whether the wires are intact and the contacts are good. If any damaged wires or poor connections are found, they should be repaired in time to prevent damage to the equipment.

4. Check sensors and controllers

The sensors and controllers of medical pump motors are a coordinated whole of the equipment. Regularly checking their working conditions can better understand the operating status of the pump motor. It is necessary to check whether the wiring of the sensor and controller is correct, whether the working performance of each button is normal, etc. After detecting the problem, repair or replace it in time.

Hot Tags: Medical pump motor, China, manufacturers, suppliers, factory, wholesale, customized, quotation, discount, price, buy, cheap